Designed to work in the network voltage of 220 V, 50 Hz.
The apparatus can be maintained and transported by one person.
It is created for domestic use. This milk machine is a hybrid electric and mechanical device, the main function of which is the automation of the milking process.
Nowadays there exist both individual small milking machines intended for domestic use on the farm, and large stationary or portable units designed for simultaneous milking of up to 50 cows per hour.
Every milking machine is equipped with a vacuum pump. And usual engine serves as a pump drive. Through pipes and set of milking devices (teat cups and so on) a vacuum is applied to the cow's udder with a special milking liner.
This milking apparatus is portable. It is possible to milk just one cow at time and a total capacity is of up to 3 cows per hour.
Teat cups of a milking machine are made of plastic.
The milking apparatus operates over a wide range of conditions (from 0.03 MPa to 0.06 MPa), depending on the condition of the udder.
The milking machine is protected against overload with built-in motor winding thermostat.
Availability of roller clamps on nozzles of milking rubber helps to prevent "dry" milking and eases the process of donning of the apparatus to the udder.
Pulse frequency is adjustable.
Type: Milking bucket / can
Animal species: Cows
Type of installation: Portable
Max operating vacuum pressure, kPa: 70
Weight, (maximum) kg: 16.8
Min number of concurrent cows: 1
Max number of concurrent cows: 3
Operating voltage, V: 220+-10% (for the unstable networks)
Max power consumption, W: 360
Type vacuum pump: dry membrane
Milk bucket capacity, litres: 22
1x Vacuum pump
1x System for milking with a bucket
1x Manual in Russian
1x Manual in English
|Shipping weight, kg||16.8000|
|Country of Manufacture||Ukraine|
|Type||Milking bucket / can|
|Type of installation||Portable|